Process Circulation Oil Temperature Controller Unit 180℃ for
Injection Molding
temperature control units are used to preheat a process to the
desired operating temperature by engaging the unit's electric
immersion heater and recirculating the water in the system. Upon
reaching the operating temperature the can continue to add heat or
becomes a cooling device by exchanging a small amount of
recirculated water with cooling water from an external source. The
cooling water is precisely metered into the system by the cooling
valve.
Oil Temperature Control Units circulate high temperature heat
transfer fluid through the process application for temperature
control. AOS Series temperature control units offer temperature
control from 25°Cto 180 °C.
Applications:
Temperature control unit is used to control the temperature of
various industrial fields,
such as following:
Specifications:
PECIFICATIONS 1
Model | Unit | AOS-05(A) | AOS-10(A) | AOS-20 |
Temp.Range | ºC | Into the water temperature: +25~180ºC |
Temp.Control Accuracy | ºC | PID±1ºC |
Power supply |
| AC3380V 50HZ+Earth(5M) |
Heat transfer medium |
| Oil |
Cooling Method |
| Indirect Cooling |
Heating capacity | kw | 6 | 9 | 9 |
Horsepower of pump | HP | 0.5 | 1 | 2 |
Pump Flow | L/min | 35 | 55 | 95 |
Pump Pressure | kg/cm² | 1.5 | 1.8 | 2.0 |
Max power consumption | kw | 7 | 10 | 11 |
Oil reserve | Liter | 8 | 8 | 8 |
Alarm Function | Open phase/Oil starvation/Excess temperature/Overload/Reverse turn |
Cooling Water Pipe | INCH | 1/2 | 1/2 | 1/2 |
Circulating Oil Pipe | INCH | 3/8*2 | 3/8*4 | 3/8*4 |
Size (L*W*H) | mm | 630*325*745 | 630*325*745 | 630*325*745 |
Weight | Kg | 66 | 75 | 80 |
SPECIFICATIONS 2
Model | Unit | AOS-30 | AOS-50 | AOSD-10 |
Temp.Range | ºC | Into the water temperature: +25~180ºC |
Temp.Control Accuracy | ºC | PID±1ºC |
Power supply |
| AC3380V 50HZ+Earth(5M) |
Heat transfer medium |
| Oil |
Cooling Method |
| Indirect Cooling |
Heating capacity | kw | 18 | 24 | 9+9 |
Horsepower of pump | HP | 3 | 5 | 1+1 |
Pump Flow | L/min | 190 | 240 | 55+55 |
Pump Pressure | kg/cm² | 2.2 | 2.6 | 1.8 |
Max power consumption | kw | 20.25 | 27.75 | 20 |
Oil reserve | Liter | 30 | 40 | 18 |
Alarm Function | Open phase/Oil starvation/Excess temperature/Overload/Reverse turn |
Cooling Water Pipe | INCH | 1/2 | 1/2 | 1/2 |
Circulating Oil Pipe | INCH | 1/2*4 | 3/4*4 | (3/8*4)*2 |
Size (L*W*H) | mm | 1000*420*1100 | 1150*500*1250 | 630*600*745 |
Weight | Kg | 90 | 160 | 110 |
Remarks:
1. We reserve the right to make changes to the above specifications
without notification.
2. Some special specifications could be custom-manufactured as you
requested.
Competitive Advantage:
1. Explosion-proof device for pipelines
2. Air blowing and return function (optional)
3. Thermometer for return oil
4. Automatic air-exhausting function after startup
5. Switchover of heating power
6. Isolated electric box for longer services lives of electric
appliances
7. Negative-pressure system(optional)
8. RS485 communication function for automated management(optional)
9. BY-PASS pressure release loop for hot oil
10. Customizable multi-point temperature control unit
11. Customizable horse power and heating power of oil pump
12. Brands OMRON , FUJI , TE , LG , MOELLER , ABB and WEST for
electric appliances
13. Range of temperature control :25℃→180℃for incoming water
14. 304 stainless steel integrated pipelines for less pipe
resistance and rust
15. Control mode : imported microcomputer or PLC(optional)
16. Perfect safety protection , fault display , easy repair and
maintenance even without professionals
l The temperature control of the precise injection molding
l The temperature control of extrusion forming equipment.
l The temperature control of rubber forming machinery.
l The temperature control of cast film production lines.
l The temperature control of cable extrusion production lines.
l The temperature control of tyre production lines.
l The temperature control of quadriplex extrusion production lines.
l The temperature control of three-roller or four-roller rolling
equipment.
l The temperature control of the dies for the compression casting
of magnesium, aluminum, zinc alloy.
l The temperature control of the roller pressing applied in rubber,
plastic and leather industries.
l Crude oil heating of the oil sinks on tankships.
l The temperature control of the paper-making industry.
l The temperature control of printing and dyeing industry and
drying.
l The temperature control of chemical engineering and reaction
kettles.
l The temperature control of RHAM superheated water high-gloss
traceless injection molds.
Comparing with most other machine in China
Advantages | AODE Machine | Most Other Machine In China |
Control part | 1.Imported PC Board and thermostat. 2.Double resistance PID automatic calculus (heating and cooling),
ensure the precision of temperature control no more than ±1° c. 3.Actual temperature difference is small, obvious energy-saving
effect. | 1.Touch-tone or integrated circuit plate control , thermostat is
not separated . 2.Only single PID control of heating, temperature control is not
precise . 3.Actual temperature difference is large, repeated
temperature fluctuations led to large energy consumption. |
Components | 70% Originally imported from Europe, Japan, America (configuration table could be additional) | Most manufactured in China |
Pipeline | 1.Primary systems use welded 304 stainless steel integrated
pipelines. 2.Less pipe resistance(Enhance thermal conduction),Pipelines are
sealed by anaerobic adhesive , which tolerant temperature is 500℃,
stop leakage； | 1.Primary systems use galvanized pipe, or 304 stainless steel tube
combined with other materials. 2.Tube due to pipe interface resistance (heat conduction loss),
leaking chance is high, prone to be scaling. |
Pump | 1. Large flow vortex pumps imported from Italia Okland or Germany SPECK. 2.Resisting high temperature and pressure (The size of the flow and pressure is the key of heat conduction) 3.Adopt imported shaft seal to avoid leakage | 1.Resisting high-temperature pump, usually manufactured in China 2.Native shaft seal which has lower flow and pressure |
Plate shell | Using 2.0 steel plate | Using 1.2 steel plate |
Return water temp. detection | YES Observe the heated object’s actual temperature, and know whether
its pipelines are smooth or not in time | NO |
High-pressure explosion-proof device | YES Avoid high-pressuresafety misadventure which happens due to the
valve close heating | NO |
Our service:
1.Your inquiry related to our products or prices will be replied in
24hours.
2.We can send “Process Cooling&Heating Selection Table” to you
for selecting suitable units.
3.We will offer detailed Technical Solution including
configuratuion and design idea for you.
4.OEM&ODM, any your customized units we can help you to design
and put into product.
