Flexible Type Air Cooled Water Chiller Heat Pump Environment
protection
Model HLWH～ | 360DM | 390DM | 460DM | 490DM | 540DM | 590DM | 630DM |
Rated Cooling Capacity | Cooling Capacity (KW) | 358 | 391 | 464 | 490 | 536 | 586 | 632 |
Comp. Input Power (KW) | 116.4 | 127.6 | 141.0 | 148.2 | 164.8 | 180.4 | 197.8 |
Rated Heating Capacity | Heating Capacity (KW) | 387 | 423 | 491 | 518 | 569 | 622 | 675 |
Comp. Input Power (KW) | 114.4 | 125.6 | 138.3 | 145.4 | 161.7 | 176.9 | 194.4 |
Refrigerant | R407C |
Power Supply | 380V/ 3ph/ 50Hz |
Safety Protection | Phase reversion protection, Phase lack protection, Overload current protection,
Discharge air temp. protection, Low & High pressure protection, Low temp. protection, Water flow protection. |
Number of Refrigeration Circuit | 2 |
Capacity Control (%) | 0, 25, 37.5, 50, 62.5, 75, 87.5, 100 |
Refrigerant Charge (Kg) | 114 | 122 | 146 | 150 | 164 | 178 | 196 |
Air Cooled Heat Exchanger | Ripple Aluminum Fins Around Copper Pipe |
Water Cooled Heat Exchanger | Dia.of Pipe (inch) | 5" | 5" | 3"×2 | 3"×2 | 4"×2 | 4"×2 | 4"×2 |
Water Side Max Pressure (MPa) | 1 |
Chilled Water Flow(m3/h) | 61.6 | 67.2 | 79.8 | 84.3 | 92.2 | 100.8 | 108.7 |
Water Pressure Drop (kPa) | 42 | 54 | 44 | 52 | 54 | 55 | 65 |
Flow of Hot Water(m3/h) | 66.6 | 72.7 | 84.4 | 89.1 | 97.9 | 107.0 | 116.1 |
Axial Fan | Air Flow×1000m3/h | 172.8 | 172.8 | 230.4 | 230.4 | 230.4 | 321.6 | 321.6 |
Power×Qty (KW) | 1.2×12 | 1.2×12 | 1.2×16 | 1.2×16 | 1.2×16 | 2.0×16 | 2.0×16 |
Running Noise dB(A) | 75 | 75 | 75 | 75 | 75 | 75 | 75 |
Total Weight (Kg) | 5620 | 5800 | 6240 | 6430 | 6600 | 6960 | 7320 |
Running Weight(Kg) | 6040 | 6280 | 6680 | 6850 | 7100 | 7460 | 7960 |
1. Rated Cooling Capacity Based on: DB Temperature 35℃/WB
Temperature 24℃ |
Chilled water inlet/outlet temp. 12℃/7℃, Fouling factor:
0.088㎡.°C/KW. |
2. Rated Cooling Capacity Based on: DB Temperature 7℃/WB
Temperature 6℃ |
Hot water inlet/outlet temp. 40℃/45℃; Hot water range: 45℃～45℃; |
2. Chilled Water Range: 5～20℃; Lowest Ambient Temperature: -5℃～43℃; |
3. Heat recovery unit water in/out temperature: 50℃/55℃; |
4.Changes of Specification for lmprovement May Be made without
Notice. |
Feature :
Flexible configuration
The unit and tank flexible configuration.A different water tank to
choose,pressure or open type connected to
meet the different demands of clients.
Environment Friendly
Using refrigerant 407C or 410A, no damage,environment friendly.
Simple operation
Intelligent design, LCD display, simple operation, free setting
during 30 ° c - 60° c and cycle timing set
on/off freely.
Quiet running
Using efficient, low-noise rotary, closed scroll compressors and
low-noise fan,ensure quiet running.
Working environment
Applicable to -15°C~45°C- the outdoor harsh environment
temperature, all-weather work.
Wide application
Widely used for room radiant, floor heating, schools, factories,
apartments, sauna, SPA association, beauty
salon, fitness center, guesthouse, hotel, hospital, senior
residential, swimming pool, factories, farms,
greenhouse production process etc, can replace the fuel gas boiler
and heating boilers, water equipment etc.
Modular design
Multi-modular units adopt module combined structure to increase
unit’s flexibility in transportation, installation,
adjustment and maintain and reduce fee for transportation,
installation and equipment maintain.
Unit protection components
The units have thermal protection switch, overload relay, high/low
pressure switch, paddle flow switch and
delay-starting protection devices to ensure unit runs under safety,
reliable working condition and unit is easy to
maintain and repairing.
